Verbatim FWC-03 Pro Qi Fast Wireless Autoladegerät retail Black

CP-DOUBLFOOTSTAND=

RAM-HOL-TAB20U

MMEN76

512707

ARMTBLTDT

The Cisco IP Phone Expansion Module 7914 extends the capabilities of the Cisco IP Phone 7960 with additional buttons and an LCD display. Replacement of the standard Cisco 7960 footstand is required. The standard footstand is replaced with a two-piece footstand specifically designed to support the Cisco 7914. Two footstands are available: a single footstand where one Cisco 7914 is used and a double footstand where two Cisco 7914 Expansion Modules are used on a single Cisco 7960. The only tool required for installation of the Cisco 7914 is a flat blade screwdriver or other appropriate tool to unlatch the pins securing the footstand to the Cisco 7960.

Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 9.5" to 12.125" Width: 6.55" to 7.43" Depth: 0.3" to 0.875" Note: Product consists of holder only. Case not included.

- This latest Security Mac Mini Lock / Mac Mini Mount from Maclocks.com, does a fantastic job Securing your new Mac Mini.
- Well it doesn't get much easier, you can mount the mac mini using a security bracket to any surface (wall, desk, under table, back of the monitor) utilizing the standard set of 75 or 100 VESA mount holes.
- This mac mini mount is made from 100% Solid high grade aluminum construction and makes for a great security solution.
- You slide the mac mini into the Mac Mini Mount and security bracket, secure the lock in place and you are good to go - all in seconds.
- You can add one of Maclocks security cable locks to your order.
- The loop-ended security cable is galvanized steel and the cable can be looped around a stationary object.
- Further more we are happy to report there is no WI FI signal lost what so ever.
- This Mac mini lock, is already posed to be one of our best sellers in the Education and Corporate Market.

Includes:
- Mac Mini Security Enclosure.
- Mac Mini Security Lock.

The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Tablet  Mount | For 4.7" to 12.9" Tablets | Optional Wall-Mount Base Included

Integrate your iPad (including the 10.2" iPad or the 11" and 12.9" iPad Pro) or other tablet seamlessly into your workspace, with this adjustable tablet stand. Move the tablet arm up or down and rotate the tablet to adjust your viewing position instantly. The universal tablet stand rests securely on your desk, or you can mount it to a wall, or on the underneath surface of a cabinet or cupboard.

Maximize Your Tablet Use

With this highly adjustable tablet stand, you can maximize use of your tablet without having to hold it in your hand or place it down on your desk.

Change Your Viewing Angle with Ease

Simply move the tablet arm up or down, with its two movable joints, to position your tablet at the perfect height. The tablet arm pivots 0 / +170 degrees at the base and -40 / +180 degrees at the elbow, to allow easy adjustment of the tablet positioning. Switch easily from portrait to landscape position, with 360 degree rotation.

Hassle-Free Installation

The clamp spreads apart easily to hold a tablet or phone from 4.7" to 12.9" in size, and up to 1 kg (2.2 lb.) in weight. With its large base, the tablet stand rests securely on your desk, counter or other flat surface. A smaller base is also included, which lets you mount the tablet stand to a wall, or on the bottom surface of a work cabinet or kitchen cupboard, for a wide range of applications.

The ARMTBLTDT is backed by a 5-year StarTech.com warranty and free lifetime technical support.

The StarTech.com Advantage

- Universal tablet stand supports a wide range of tablets and phones, from 4.7" to 12.9"
- Tablet arm pivots +170 degrees at base, -40 / +180 degrees at elbow, and rotates 360 degrees for portrait or landscape viewing
- Includes optional base for wall or surface mounting

Cisco IP Telephony IP Phones Double Footstand kit for 2x CP-7914

RAM Tab-Tite Holder for 9" Tablets with Heavy Duty Cases

Mac Mini M1 Security Mount And Lock

Active holder with cig-plug

StarTech.com Universal Tablet Stand - Portable Tablet Stand w/ Optional Wallmount Base - Adjustable Pivoting Tablet Stand (ARMTBLTDT)

Cisco

RAM Mounts

Compulocks

Brodit

StarTech.com