Cisco CP-DOUBLFOOTSTAND= holder Passive holder Telephone Grey

K39217EU

RAM-HOL-TAB20U

F7U017BT

512707

ARMTBLTDT

Give your smartphone a secure place to ride - even when in a case. The Kensington Windshield/Vent Car Mount for Smartphones installs in seconds and keeps your smartphone within easy reach.

Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 9.5" to 12.125" Width: 6.55" to 7.43" Depth: 0.3" to 0.875" Note: Product consists of holder only. Case not included.

YOUR NEW CO-PILOT
The Car Vent Mount provides a safe, hands-free way to use your smartphone in the car. Vent Mount fits most large smartphones with screen sizes up to 5.5 inches with a protective case on. This cradle securely attaches your smartphone to an air vent on your car's dash for a convenient optimal viewing level--no suction cup or adhesive required. The Vent Mount rotates 180 degrees so you can use your smartphone in portrait or landscape mode.

MADE FOR:
iPhone, Samsung, LG, other smartphones up to 5.5 inches with case on

ADJUSTS TO FIT YOUR DEVICE
This versatile, low-profile mount clips easily to most vents, so you can use it in any vehicle. The adjustable brackets expand to fit most smartphones with screen sizes up to 5.5 inches, including the iPhone, Samsung, and other smartphones on the market.

VIEW IN PORTRAIT OR LANDSCAPE
The Vent Mount can be rotated 180 degrees left or right so you can position your smartphone for viewing in either portrait or landscape mode. Portrait mode is ideal for charging, listening to music, and hands-free phone calls, while landscape view makes using your favorite navigation apps easier.

EASY CABLE MANAGEMENT
A cable holder on the back of the mount keeps your phone's connector perfectly positioned for easy access and neatly connected to your device. This also makes it easy to charge your smartphone while mounted using your car's power outlet (car charger sold separately).

CASE COMPATIBLE
No need to take the protective case off your smartphone! The Car Vent Mount is designed to fit smartphones with larger screens but will also accommodate most cases up to 3mm thick.

The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Tablet  Mount | For 4.7" to 12.9" Tablets | Optional Wall-Mount Base Included

Integrate your iPad (including the 10.2" iPad or the 11" and 12.9" iPad Pro) or other tablet seamlessly into your workspace, with this adjustable tablet stand. Move the tablet arm up or down and rotate the tablet to adjust your viewing position instantly. The universal tablet stand rests securely on your desk, or you can mount it to a wall, or on the underneath surface of a cabinet or cupboard.

Maximize Your Tablet Use

With this highly adjustable tablet stand, you can maximize use of your tablet without having to hold it in your hand or place it down on your desk.

Change Your Viewing Angle with Ease

Simply move the tablet arm up or down, with its two movable joints, to position your tablet at the perfect height. The tablet arm pivots 0 / +170 degrees at the base and -40 / +180 degrees at the elbow, to allow easy adjustment of the tablet positioning. Switch easily from portrait to landscape position, with 360 degree rotation.

Hassle-Free Installation

The clamp spreads apart easily to hold a tablet or phone from 4.7" to 12.9" in size, and up to 1 kg (2.2 lb.) in weight. With its large base, the tablet stand rests securely on your desk, counter or other flat surface. A smaller base is also included, which lets you mount the tablet stand to a wall, or on the bottom surface of a work cabinet or kitchen cupboard, for a wide range of applications.

The ARMTBLTDT is backed by a 5-year StarTech.com warranty and free lifetime technical support.

The StarTech.com Advantage

- Universal tablet stand supports a wide range of tablets and phones, from 4.7" to 12.9"
- Tablet arm pivots +170 degrees at base, -40 / +180 degrees at elbow, and rotates 360 degrees for portrait or landscape viewing
- Includes optional base for wall or surface mounting

Universal Car Mount for Smartphones

RAM Tab-Tite Holder for 9" Tablets with Heavy Duty Cases

Car Vent Mount

Active holder with cig-plug

StarTech.com Universal Tablet Stand - Portable Tablet Stand w/ Optional Wallmount Base - Adjustable Pivoting Tablet Stand (ARMTBLTDT)

Kensington

RAM Mounts

Belkin

Brodit

StarTech.com