Manhattan 1080p@60Hz Compact HDMI over Ethernet Extender Kit, Extends Distances of Signal up to 60m with a Single Cat6 Ethernet Cable, Transmitter and Receiver included, Power over Cable, Ultra Slim Design, Three Year Warranty, Black

HDBOOST4K

38208

VLHDMIEXTDGL50

Use this repeater to amplify your 4K HDMI signal and extend it 30 ft. using a standard HDMI cable

This 4K HDMI® signal booster lets you increase the signal strength of your HDMI video source so it can travel greater distances using standard HDMI cables. You can achieve resolutions up to 4K at 60Hz at distances of up to 30 ft. (10 m), and depending on your desired resolution, the booster supports distances up to 115 ft. (35 m) away at 1080p 60Hz resolution.

To install the booster, place it between two HDMI cables. Reference the table below for supported resolutions and cable lengths.

Cable length

from source

Cable length

to display

Total cable length

Maximum

resolution

50 ft. (15 m)

65 ft. (20 m)

115 ft. (35 m)

1080p (60 Hz) - 1920x1080

32 ft. (10 m)

50 ft. (15 m)

82 ft. (25 m)

4K (30 Hz) - 3840x2160

15 ft. (5 m)

15 ft. (5 m)

30 ft. (10 m)

4K (60 Hz) - 3840x2160

Maintains Ultra HD 4K video signals at 60Hz

When you're extending HDMI over distances using standard video cabling, higher resolutions from your HDMI 2.0 devices can become unavailable after a few feet. Using this HDMI signal booster ensures that HDMI 2.0 resolutions up to UHD 4K at 60Hz are available even at distances up to 30 ft. (10 m).

You can achieve even longer distances at lower resolutions -- up to 4K at 30Hz, at up to 82 ft. (25 m), and 1080p at 60Hz at up to 115 ft. (35 m).

Easy and discreet installation

With its small form factor design and no external power adapter, the HDMI booster is easy to hide, for a discreet installation. By extending your video signal using standard HDMI cables, the 4K booster is a cost-effective alternative to more expensive extension systems that require the installation of a CAT5 or CAT6 cabling infrastructure.

Supports a variety of distances

Support for a variety of extension distances makes the booster perfect for multi-device deployment across large institutions, such as boardrooms in corporate offices, classrooms in schools, or waiting rooms in hospitals, as these applications may require varied distances in different rooms.

Note: To achieve resolutions up to 4K60, your video source, display and cabling must support HDMI 2.0.

The HDBOOST4K is TAA compliant and backed by a 2-year StarTech.com warranty with free lifetime technical support.

The StarTech.com Advantage

Cat.6 extenders allow for cost effective, reliable extension of audio or video signals over longer distances that are not possible with passive cable or active repeater solutions.

The Lindy 70m Cat.6 HDMI 4K30 and IR Extender is a simple to use solution which lets the user extend HDMI signals up to 70m using a single low cost Cat.6 U/UTP cable (not included). For added convenience, IR signals (20-60 kHz) can also be extended using the supplied IR receiver and emitter cables.

Supporting 4K resolutions up to 3840x2160@30Hz 4:4:4 8bit, video content can be seen with incredible clarity at distances up to 70m, perfect for use in a variety of AV and digital signage applications in a range of settings including residential setups, education, business, retail and healthcare.

This extender features an HDMI loop-out port on the transmitter for local simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the EDID data, which determines the supported video and audio formats, can be copied from either the local display connected to the transmitter or the remote display connected to the receiver.

Power over Cable (PoC) functionality enables the extender to operate from a single power supply connected to the transmitter, allowing the receiver to be located where there is limited access to mains power sockets, making it ideal for minimalist, discreet installations.

In addition to PoC functionality the extender's slim design allow it to be easier to install in limited spaces behind flat screen monitors or TVs.

Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.

Ultra cost efficient HDMI extention dongles using CAT6a cable up to 50m extention. Support power over network cable (PoC) from transmitter to receiver

Typical installation:
It can be installed anywhere to extend HDMI signal up to 50m using CAT6a CAT cable

E.g. Private installation, Info screens in Shops or offices

Function:
HDMI extender
Point to point,Tx to Rx for 50m 1080P@60Hz

Key features:
Super cost-effective HDMI extender over CAT cable
USB power cables included in the package

StarTech.com HDMI Signal Booster - HDMI Repeater Extender - 4K 60Hz

70m Cat.6 HDMI 4K30 and IR Extender with PoC and Loop Out

HDMI over CATx extender 50m

StarTech.com

Lindy

VivoLink