JLC Valencia Tablet Desk Mount 5 to 10.5

CP-DOUBLFOOTSTAND=

20-71043-04R

RAM-HOL-TAB20U

MMEN76

512707

The Cisco IP Phone Expansion Module 7914 extends the capabilities of the Cisco IP Phone 7960 with additional buttons and an LCD display. Replacement of the standard Cisco 7960 footstand is required. The standard footstand is replaced with a two-piece footstand specifically designed to support the Cisco 7914. Two footstands are available: a single footstand where one Cisco 7914 is used and a double footstand where two Cisco 7914 Expansion Modules are used on a single Cisco 7960. The only tool required for installation of the Cisco 7914 is a flat blade screwdriver or other appropriate tool to unlatch the pins securing the footstand to the Cisco 7960.

Description:

Gooseneck Intellistand – Black colour

Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 9.5" to 12.125" Width: 6.55" to 7.43" Depth: 0.3" to 0.875" Note: Product consists of holder only. Case not included.

- This latest Security Mac Mini Lock / Mac Mini Mount from Maclocks.com, does a fantastic job Securing your new Mac Mini.
- Well it doesn't get much easier, you can mount the mac mini using a security bracket to any surface (wall, desk, under table, back of the monitor) utilizing the standard set of 75 or 100 VESA mount holes.
- This mac mini mount is made from 100% Solid high grade aluminum construction and makes for a great security solution.
- You slide the mac mini into the Mac Mini Mount and security bracket, secure the lock in place and you are good to go - all in seconds.
- You can add one of Maclocks security cable locks to your order.
- The loop-ended security cable is galvanized steel and the cable can be looped around a stationary object.
- Further more we are happy to report there is no WI FI signal lost what so ever.
- This Mac mini lock, is already posed to be one of our best sellers in the Education and Corporate Market.

Includes:
- Mac Mini Security Enclosure.
- Mac Mini Security Lock.

The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Cisco IP Telephony IP Phones Double Footstand kit for 2x CP-7914

Barcode Reader Holder, Black

RAM Tab-Tite Holder for 9" Tablets with Heavy Duty Cases

Mac Mini M1 Security Mount And Lock

Active holder with cig-plug

Cisco

Zebra

RAM Mounts

Compulocks

Brodit