Cablenet

Cablenet Loaded Fibre Patch Panel OM3/4 48 Fibre - 24 x LC Duplex

SKU
XXFLPP48LC4
In Stock
Loaded Fibre Patch Panel, OM4, 48F/24 x LC Duplex
Login for pricing

Secure fast payment on this purchase

Next Day (UK) Delivery offered on stock items

  • OM3/4 (50/125)
  • Loaded with 24 x LC Duplex Couplers
  • Cable Glands, Bunny Clips, and Splice Cassettes included
  • High-Quality Sliding Mechanism
Network
DuplexYes
Cable types supportedFiber
Ports quantity48
Connector(s)LC
Single-mode fiber (SMF) supportedNo
Multi-mode fiber (MMF) supportedYes
Fiber ports quantity48
Fiber optic connectorLC
Design
MountingRack mounting
Rack capacity1U
Cable managementYes
Label holderNo
Product colourBlack
Features
MountingRack mounting
Rack capacity1U
Product colourBlack
Technical details
MountingRack mounting
Colour
Product colourBlack

You may also be interested in

Compare Products
Product Cablenet Loaded Fibre Patch Panel OM3/4 48 Fibre - 24 x LC Duplex Cablenet Loaded Fibre Patch Panel OM3/... Login for pricing
Lanview LVO233835 patch panel 1U
Bestseller
Lanview LVO233835 patch panel 1U Login for pricing
Cablenet 48 Port Cat6 UTP 2u Coupler Panel Cablenet 48 Port Cat6 UTP 2u Coupler P... Login for pricing
Cablenet 48 Port Cat6 UTP 1u Patch Panel Cablenet 48 Port Cat6 UTP 1u Patch Panel Login for pricing
Cablenet 48 Port Cat5e UTP 1u Patch Panel Cablenet 48 Port Cat5e UTP 1u Patch Pa... Login for pricing
Lanview LVO233840 patch panel 1U
Hot Product
Lanview LVO233840 patch panel 1U Login for pricing
SKU
XXFLPP48LC4
LVO233835
72-3407
72-3389
72-3388
LVO233840
Description
OM3/4 Multimode Loaded Fibre Patch Panel to accept 48 fibres connecting to 24 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands, bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.

The fibre panels are available with Multimode (OM3 or OM4) or Singlemode adaptors and are configured for 4 to 96 fibres with LC adaptors or 8 to 48 fibres with SC adaptors.
Mounted with 6 x LC Duplex Single Mode adapters. 12 pigtails pre-mounted in splice cassette.

Rubber coated strain relief suitable for blown-fibre.

The patch panel have fixtures for splice cassettes and cable management cutouts for securing the cables with cable ties or velcro straps to relieve cable stress.
These 2u Cat6 unshielded UTP Through Coupler Panels are capable of data rates up to 1Gb/sec. They incorporate a removable rear cable management bar and come complete with cable ties. Installation is easy, just plug in your patch leads - no punch down required.
The Cablenet Cat6 UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.
The Cablenet Cat5e UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.
19'' Fibre patch panel for up to 24 SC Simplex or LC Duplex adapters. The panel back side features 4 Ø20 mm inlets suitable for PG screw connection and 2 rectangular inlets 80 x 34 mm with blank plates.

Mounted with 12 x LC Duplex Single Mode adapters. 24 pigtails pre-mounted in splice cassette.

Rubber coated strain relief suitable for blown-fibre.

The patch panel have fixtures for splice cassettes and cable management cutouts for securing the cables with cable ties or velcro straps to relieve cable stress.
Short Description
Loaded Fibre Patch Panel, OM4, 48F/24 x LC Duplex
24-Port Fibre patch panel mounted with 6 x LC duplex Single Mode connectors
48 Port, 2U, Cat6, UTP, Through Coupler Panel with Marking System
48 Port 1U Cat6 UTP Right Angle Rear EasyPunch Patch Panel
Cat5e Easy Punch Panel 1U 48 Port
24-Port Fibre patch panel mounted with 12 x LC duplex Single Mode connectors
Manufacturer
Cablenet
Lanview
Cablenet
Cablenet
Cablenet
Lanview