V7 UPS 750VA Desktop UK

10120048

BV650I

10121084

10121066

NPW 600

A Line- Interactive UPS offers backup function and automatic voltage regulation (AVR). AVR regulates voltage to the appropriate level by decreasing it during surges or swells or increasing it during a sag or burnout. The advantage is a better protection for sensitive IT- and household equipment and avoids damage caused by voltage up- and downturn.

AVR function also benefits the battery lifetime. As long as voltage level is not lower than 70% to 90%, or higher than 110% to 125% AVR will adjust voltage to normal level. I case the voltage drops to a lower or higher level, the UPS will directly switch to battery mode to avoid dropouts and damage of the connected equipment.

Line- Interactive UPS offers USB port (RS-232) to connect to a multitude of operating systems for monitoring voltage, power and battery status.

Line- Interactive UPS are designed for medium cost application with moderate load levels

- 650VA Line-Interactive UPS
- USB Connection for monitoring
- Cold DC start and AVR function
- Green Power Function for energy saving

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Cold-start capable
Provides temporary battery power when the utility power is out.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Audible alarms
Provides notification of changing utility power and UPS power conditions.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

The PowerWalker basic VI 600/800/1000/1200/1500/2200 STL series is designed to answer the essential market needs. This line interactive UPS will protect your load from power failures and voltage disturbances, while remaining affordable and compact. It is equipped with a USB port with HID support allowing easy and immediate communication with any O/S.

Additionally this series offers an advanced auto-dimming LCD panel with a smart multifunctional button (a single click will illuminate the LCD panel, a double click will mute the alarm and a long-press will control the output).

The managing software PowerWalker PowerMaster is available for download from our website.

The PowerWalker Basic VI 650/850/1000 SB series is designed to answer the essential market needs. This line interactive UPS will protect your load from power failures and voltage disturbances, while remaining affordable and compact. It is equipped with a USB port with HID support allowing easy and immediate communication with any O/S.

The Net Power series includes the 600-2000 VA models and uses digital Line Interactive (VI) technology.

The load is powered from the mains through an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress spikes and transients. When the mains fails, the load is powered by the inverter with a pseudo sinewave to provide sufficient runtime for computer system shutdown using the PowerShield.

PowerWalker VI 650 SE, 650VA/360W, 1x 12V/7Ah, USB, RJ-11, WinPower

EASY UPS BV 650VA, AVR, IEC, 230V

Line Interactive, 600VA, 360W, 2 x Type G outlet

Basic VI 650 SB, Line-Interactive, 650VA / 360W, 162-290 VAC, 50Hz or 60Hz

NetPower 600 IEC USB, Line Interactive, 600 VA, AVR

PowerWalker

APC

PowerWalker

PowerWalker

Riello