StarTech.com 100m (328ft) SC to SC (UPC) OS2 Single Mode Simplex Fiber Optic Cable, 9/125µm, 40G/100G, Bend Insensitive, Low Insertion Loss, LSZH Fiber Jumper Cord

SKU

SPSMSCSC-OS2-100M

In Stock

StarTech.com 100m (328ft) SC to SC (UPC) OS2 Single Mode Simplex Fiber Optic Cable, 9/125, 40G/100G, LSZH Fiber Jumper Cord

Secure fast payment on this purchase

Next Day (UK) Delivery offered on stock items

SIMPLEX OS2 CABLE: Single Mode Simplex OS2 Fiber Cable is immune to EMI and optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count
QUALITY CONSTRUCTION: SC/SC-UPC ends for improved return loss over PC polish; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm
SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 0.35dB/km outperforms industry standards
COMPATIBILITY: Simplex Single Mode Fiber Patch Cord supports 40G/100G networks; Backward compatible with OS1; High micro-bend resistance facilitates tight bends in complex installations; Ideal for point-to-point setups or single-fiber NICs and SFPs
SPECS: 100m (328 foot); OS2 Single Mode; SC/SC (UPC) Simplex; 100Gbps; 9/125µm; 1260-1625nm Laser Optimized; Insertion Loss: ≤0.3dB; Return Loss: ≥55dB; Cable OD: 2mm; Bend Radius: 10mm (0.39in) loaded/unloaded

Specifications

Technical details
Jacket material	Polypropylene, Low smoke zero halogen (LSZH)
Fiber mode structure	Single-mode
Connector 1	SC
Connector 2	SC
Cable type	SC/UPC
Cable length	100 m
Core diameter	9 µm
Cladding diameter	125 µm
Insertion loss	0.3 dB
Attenuation (max)	0.35 dB/km
Sustainability compliance	Yes
Compliance certificates	RoHS
Features
Bending radius	1 cm
Fibre optic type	OS2
Return loss	55 dB
Jacket material	Polypropylene, Low smoke zero halogen (LSZH)
Fiber mode structure	Single-mode
Connector 1	SC
Connector 2	SC
Cable type	SC/UPC
Cable length	100 m
Core diameter	9 µm
Cladding diameter	125 µm
Operating temperature (T-T)	-20 - 60 °C
Storage temperature (T-T)	-20 - 60 °C
Insertion loss	0.3 dB
Data transfer rate	100 Gbit/s
Wavelengths supported	1280,1550,1300,1590,1310,1600,1383,1625,1260,1490 nm
Product colour	Yellow
Connector 2 gender	Male
Connector 1 gender	Female
Data transmission
Data transfer rate	100 Gbit/s
Operational conditions
Operating temperature (T-T)	-20 - 60 °C
Storage temperature (T-T)	-20 - 60 °C

Weight & dimensions
Bending radius	1 cm
Cable length	100 m
Package width	280 mm
Package depth	280 mm
Package height	18 mm
Cable diameter	2 mm
Package weight	356.1 g
Packaging data
Package width	280 mm
Package depth	280 mm
Package height	18 mm
Package weight	356.1 g
Quantity per pack	1 pc(s)
Logistics data
Master (outer) case width	380 mm
Master (outer) case length	380 mm
Master (outer) case height	280 mm
Products per master (outer) case	20 pc(s)
Quantity per pack	1 pc(s)
Other features
Attenuation (max)	0.35 dB/km

You may also be interested in

Compare Products
Product	StarTech.com 100m (328ft) SC to SC (UP... Login for pricing	Recommended Cisco SFP-10G-AOC3M= InfiniBand/fibre... Login for pricing	Hot Product Cisco CAB-SPWR-150CM= InfiniBand/fibre... Login for pricing	Popular D-Link 1M SFP+ Direct Attach Stacking... Login for pricing	Bestseller Cisco StackWise-480, 1m InfiniBand/fib... Login for pricing	New Ubiquiti Single-Mode LC Fiber Cable fi... Login for pricing
SKU	SPSMSCSC-OS2-100M	SFP-10G-AOC3M=	CAB-SPWR-150CM=	DEM-CB100S	STACK-T1-1M=	FC-SM-300
Description	Enhance the performance capabilities of CWDM applications over an OS2 fiber network OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Compatibility Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments. Engineered for Optimal Performance Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished SC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards. LSZH Cable Jacket Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered. Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. The StarTech.com Advantage	Crossover and straight-through cables are used in order to connect switch ports or interfaces to network devices. Consult this table in order to see when to use each of these cable types. Find the device in the left-hand column and match it up with another device in the top row. The intersection of these two devices gives you the cable type used to connect them together.	The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack. StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS. A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS. An XPS cable has a color band on the cable ends as well, red on one end and yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green and blue band can connect to Catalyst 3750-X or 3560-X switch. The Cisco Catalyst 3750-X Series Switches come with four power supply options and any of them can be used on any switch in a stack and in any combination.	These 10G Passive SFP+ Twinaxial Direct Attach Cables are designed to support connections for 10 Gbps Gigabit Ethernet or Gigabit Ethernet switches with 10 Gbps Gigabit Ethernet uplink, much more faster than SFP which only supports 2.5 Gbps Gigabit Ethernet. With two cable models including the DEM-CB100S and DEM-CB300S, these cables are suitable for short distances up to 3 metres, and is ideal for highly cost-effective networking connectivity between switches and servers within a rack or in adjacent racks. These 10G Passive SFP+ Twinaxial Direct Attach Cables are certified to be compatible with D-Link products to provide you best performance and reliability. Ideal for High-Bandwidth Operations These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables support speeds of up to 10 Gbps, while having lower latency and power consumption than other cables types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. This makes it an optimal solution for handling high bandwidth transmission within short distances such as inside energy-efficient data centres. Enhanced Small Form-factor Pluggable Format These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables use Enhanced Small Form- factor Pluggable format (SFP+) connectors. The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, resulting in lower costs, lower power disruption, and higher port density. Meanwhile SFP+ connectors use the same space-per-port as standard SFP connectors but support higher data transmission speeds. Save on Costs These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables feature SFP+ connectors on both ends, thus eliminating the need for expensive SFP+ transceivers. This makes it more cost-effective than fibre cables which must use SFP+ transceivers.	Cisco StackWise-480 technology is built on the highly successful industry-leading StackWise® technology, which is a premium stacking architecture. StackWise-480 has a stack bandwidth of 480 Gbps. StackWise-480 uses Cisco IOS Software SSO for providing resiliency within the stack. The stack behaves as a single switching unit that is managed by an "active" switch elected by the member switches. The active switch automatically elects a standby switch within the stack. The active switch creates and updates all the switching/routing/wireless information and constantly synchronizes that information with the standby switch. If the active switch fails, the standby switch assumes the role of the active switch and continues to the keep the stack operational. Access points continue to remain connected during an active-to-standby switchover. A working stack can accept new members or delete old ones without service interruption. StackWise-480 creates a highly resilient single unified system of up to four switches, providing simplified management using a single IP address, single Telnet session, single CLI, auto-version checking, auto-upgrading, auto-configuration, and more. StackWise-480 also enables local switching in Cisco Catalyst 3850 Series Switches.	Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint. Available in 100, 200, and 300 ft lengths.
Short Description	StarTech.com 100m (328ft) SC to SC (UPC) OS2 Single Mode Simplex Fiber Optic Cable, 9/125, 40G/100G, LSZH Fiber Jumper Cord	10GBASE-AOC SFP+ Cable 3 Meter	150cm StackPower cable, Spare	100 cm 10GbE Direct Attach SFP+ Cable DEM-CB100S	StackWise-480 1m stacking cable spare	Single-Mode, LC - LC, 300 ft
Manufacturer	StarTech.com	Cisco	Cisco	D-Link	Cisco	Ubiquiti