StarTech.com 1 Port FTDI USB to Serial RS232 Adapter Cable with COM Retention

ICUSB2321X

504101

ICUSB232SM3

TBT3TBTADAP

32115

Add one serial RS-232 port with com retention to any laptop or computer with a USB port

The ICUSB2321X Professional grade USB Serial Adapter cable converts a USB 2.0 port into an RS232 serial port allowing you to connect to, monitor and control your serial devices. A durable, single cable design makes this the perfect solution for mobile technicians/administrators that require serial connectivity. Once connected, the USB to serial adapter retains assigned serial COM port values, allowing the same values to automatically be re-assigned to the port provided by the adapter in the event it is disconnected, then re-connected to the host computer. This innovative adapter offers a professional grade solution for connecting legacy or industrial RS232 serial devices to more modern computers, or computers with unused USB ports – perfect for connecting serial modems, barcode scanners or any device with serial sync through USB, eliminating the expense of upgrading the serial peripheral for USB compatibility. Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage

Connection wire to the electronic hook switch for Snom phones

Allows remote answering on certain Snom phones without the use of a handset lifter with Sennheiser wireless office headsets.

The CEHS-SN 01 direct connect cord connects any Sennheiser wireless office headset to certain Snom phone models (see below), allowing for remote answering and ending of calls without the use of a handset lifter.

Add an RS232 serial port to your laptop or desktop computer through USB

The ICUSB232SM3 3ft USB to Serial Adapter Cable lets you connect DB9 RS232 serial devices to your Mac® or PC laptop or desktop computer through an available USB port, as though the computer offered an onboard DB9M connector.
Unlike typical USB to serial converter cables where the conversion takes place at the DB9 end, the StarTech.com ICUSB232SM3 features a converter chip on the USB end. Converting at the USB source overcomes the 15ft. technical limit of USB cables, allowing for a much greater serial DB-9 extension cable (50ft.+ is possible depending on the application) if necessary.
Simple to install and use, this USB to Serial adapter is a cost-effective solution that bridges the compatibility gap between modern computers and legacy serial peripherals.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.

The StarTech.com Advantage

Use first-generation Thunderbolt and Thunderbolt 2 devices with your new Thunderbolt 3 computer

With this adapter, you can connect Windows and Mac based Thunderbolt™ 3 computers to older Thunderbolt devices, such as external hard drives, Thunderbolt displays, and older Thunderbolt capable Mac computers.

Because this adapter is backward compatible, you can connect to first-generation Thunderbolt devices at 10Gbps speed. With Thunderbolt 2 devices, you can connect at 20Gbps. The adapter satisfies all requirements for bi-directional data transfers and simultaneous power for bus-powered devices.

The TBT3TBTADAP is backed by a 2-year warranty for guaranteed reliability.

This adapter is not compatible with Thunderbolt 4 computers

Your computer's Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer:

• BIOS
• Thunderbolt firmware
• Thunderbolt 3 controller drivers
• Thunderbolt 3 software

The required updates will vary depending on your computer.

For an up-to-date list of affected computers and instructions, visit http://thunderbolttechnology.net/updates . If your manufacturer isn't listed on the Thunderbolt website, contact your manufacturer.

The StarTech.com Advantage

The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM Extenders, Switches and Splitters. It can also be used in place of a monitor to keep the graphics card of a PC or Server awake for remote access via IP. With support for resolutions up to Ultra HD 4K 60Hz (via cloning) including High-Dynamic Range and with the ability to passthrough HDCP 2.2 content, the Emulator is suitable for use with the very latest PC and AV applications.

Some computer systems, KVM switches and digital video signage systems may interrupt the flow of EDID data, or may not be able to pass this information directly back to the video card's output port. This adapter can be used to quickly and easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display, the cloning process takes less than 10 seconds!

It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.

StarTech.com 6ft (1.8m) 1-Port Professional USB to Serial Adapter Cable with COM Retention, USB to RS232 Adapter - TAA

CEHS-SN 01 Snom adapter

StarTech.com 3ft (91cm) 1-Port USB to RS232 DB9 Serial Adapter Cable, USB to Serial Adapter Cable - M/M

StarTech.com Thunderbolt 3 to Thunderbolt 2 Adapter (Non-Reversible) - TB3 Laptop to TB2 (20Gbps) or TB1 (10Gbps) Devices / Displays - Black - Windows/Mac (TBT3TBTADAP)

HDMI 2.0 EDID Emulator

StarTech.com

Sennheiser

StarTech.com

StarTech.com

Lindy