Lancom Systems

LANCOM GS-3252P

SKU
61876
In Stock
Managed layer 3 lite access switch, 48 Ethernet ports, 36 with PoE+ (max. 370 W) and 4 SFP+ ports (10G), 176 Gbps throughput, IPv6/IPv4, 4,000 active VLANs, QoS, 802.1X, TACACS+, country spec. IEC power cords available
Login for pricing

Secure fast payment on this purchase

Next Day (UK) Delivery offered on stock items

  • Fully managed access switch with 48x Gigabit Ethernet ports and 4x SFP+ 10G Ports
  • Basic layer-3 features like static routing and DHCP server
  • PoE support according to IEEE 802.3af/at on 36 of the 48 Gigabit Ethernet ports for efficient power supply of connected devices up to 370 watts
  • Power saving function according to IEEE 802.3az – port shutdown when no data is being transmitted
  • Security due to configurable access control on all ports according to IEEE 802.1X
  • Secure remote management with TACACS+, SSH, SSL, and SNMPv3
  • Cloud-managed LAN – for simple and fast configuration via the LANCOM Management Cloud
  • 5-year replacement service for all components
Management features
Reset buttonYes
Switch typeManaged
Web-based managementYes
Quality of Service (QoS) supportYes
Multicast supportYes
Switch layerL3
Configuring Location Settings (CLI)Yes
Cloud-managedYes
Ports & interfaces
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports quantity48
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Installed SFP modules quantity0
Installed SFP+ modules quantity0
Gigabit Ethernet (copper) ports quantity48
Console portRJ-45
Power connectorAC-in jack
Network
Cable length detectionYes
Networking standardsIEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ak, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
VLAN supportYes
Spanning tree protocolYes
Port mirroringYes
Number of VLANs4093
Link aggregationYes
Flow control supportYes
Broadcast storm controlYes
10G supportYes
Virtual LAN featuresIP subnet–based VLAN, MAC address-based VLAN, Port-based VLAN, Private VLAN, Tagged VLAN, Voice VLAN
IGMP snoopingYes
GARP VLAN Registration Protocol (GVRP)Yes
IGMP proxyYes
Data transmission
Jumbo frames10240
Throughput77 Mpps
Number of static routes128
Packet buffer memory4 MB
MAC address table32000 entries
Switching capacity176 Gbit/s
Store-and-forwardYes
Jumbo frames supportYes
Static routeYes
Number of VLANs4093
Multicast Listener Discovery (MLD) snoopingYes
Security
SSH/SSL supportYes
IGMP snoopingYes
Access Control List (ACL)Yes
Authentication typeIEEE 802.1x, RADIUS, TACACS+
IGMP proxyYes
DHCP featuresDHCP Option 66, DHCP Option 67, DHCP Option 82, DHCP client, DHCP relay, DHCP server, DHCP snooping
Multicast features
Multicast supportYes
Multicast Listener Discovery (MLD) snoopingYes
Protocols
GARP VLAN Registration Protocol (GVRP)Yes
IP Source Guard (IPSG)Yes
Design
Reset buttonYes
Form factor1U
Product colourBlack
Housing materialMetal
Rack mountingYes
Number of fans1 fan(s)
Country of originTaiwan
Performance
Noise level40 dB
Firmware upgradeableYes
Packet buffer memory4 MB
Power
Power consumption (max)460 W
Power supply includedYes
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power sourceAC/PoE
Power connectorAC-in jack
Power over Ethernet (PoE)
Power over Ethernet plus (PoE+) ports quantity36
Total Power over Ethernet (PoE) budget370 W
Power over Ethernet (PoE)Yes
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90%
Heat dissipation310 BTU/h
Virtual LAN features
VLAN supportYes
Number of VLANs4093
Virtual LAN featuresIP subnet–based VLAN, MAC address-based VLAN, Port-based VLAN, Private VLAN, Tagged VLAN, Voice VLAN
Weight & dimensions
Width442 mm
Depth375 mm
Height44 mm
Weight5.5 kg
Packaging content
Quick start guideYes
Cables includedAC, Serial
Mounting brackets includedYes
Packaging data
Mounting brackets includedYes
Quick start guideYes
Cables includedAC, Serial
Technical details
Form factor1U
Product colourBlack
Noise level40 dB
Housing materialMetal
Firmware upgradeableYes
Rack mountingYes
Compliance certificatesCE, Federal Communications Commission (FCC)
Memory
Packet buffer memory4 MB
Certificates
Compliance certificatesCE, Federal Communications Commission (FCC)
Mobile network
GARP VLAN Registration Protocol (GVRP)Yes
Other features
Country of originTaiwan
Logistics data
Country of originTaiwan
Customs product code (TARIC)85176200

You may also be interested in

Compare Products
Product LANCOM GS-3252P LANCOM GS-3252P Login for pricing
NETGEAR M4300-52G Managed L3 Gigabit Ethernet (10/100/1000) 1U Grey NETGEAR M4300-52G Managed L3 Gigabit E... Login for pricing
HPE Aruba Networking Aruba 2930F 48G PoE+ 4SFP+ Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey HPE Aruba Networking Aruba 2930F 48G P... Login for pricing
Cisco Catalyst 9200L Managed L3 Gigabit Ethernet (10/100/1000) Grey
New
Cisco Catalyst 9200L Managed L3 Gigabi... Login for pricing
Cisco Catalyst 9200L Managed L3 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) Grey
Bestseller
Cisco Catalyst 9200L Managed L3 10G Et... Login for pricing
Cisco Catalyst 9200L Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Grey
Hot Product
Cisco Catalyst 9200L Managed L3 Gigabi... Login for pricing
SKU
61876
GSM4352S-100NES
JL256A#ACC
C9200L-48T-4G-E
C9200L-24P-4X-E
C9200L-48P-4G-E
Description
Access switch with PoE for cost-effective networking
For cost-effective networking of less data-intensive end devices such as IP phones, printers, or PCs, the LANCOM GS-3252P fully managed access switch is ideal. Equipped with PoE+ support on 36 of the 48 Gigabit Ethernet ports, 4 SFP+ ports, and basic layer-3 functions such as static routing and DHCP, this switch offers intelligent management and numerous security features. Orchestrated from the LANCOM Management Cloud, it is configured efficiently and automatically.

Performance and cost optimization on 52 ports
The LANCOM GS-3252P is equipped with 48 Gigabit Ethernet ports and 4 SFP+ ports. With a data throughput of 176 Gbps on the backplane, it offers full performance even at high workloads. The switch thus forms the basis for modern network infrastructures with a large number of end devices with moderate data throughput, such as printers or IP telephones, which need to be integrated.

Central power supply without additional electrical installation
As a high-performance PoE switch, the LANCOM GS-3252P supplies connected PoE end devices without the need for additional power supplies or power cabling. It supports the Power over Ethernet standards IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) on 36 Ports. With a total PoE power of 370 watts, it is thus ideal for efficient power supply of PoE end devices with moderate power requirements.

Advantages

Static routing for fast data exchange
The LANCOM GS-3252P suports the basic layer-3 function of static routing, shifting certain routing tasks from the router to the switch. The predefinition of network routes through one or more network segments enables faster data exchange, especially in the case of high internal data traffic, and reduces the load on the router. Freed-up router capacity is then additionally available for handling external data traffic. This increases the efficiency of the entire network.

Cloud-managed LAN
The LANCOM Management Cloud opens the way to state-of-the-art switch management: Cloud-managed LAN. The LMC orchestrates the port profiles of all switches and automatically assigns the necessary network configuration, such as VLANs. In this way, all switch configurations are coordinated across sites, taking into account the network architecture, and rolled out or updated simultaneously at the click of a mouse.

DHCP server functionality
As a DHCP server, the switch is able to independently and automatically assign IP addresses to clients. The LANCOM GS-3252P supports this basic layer-3 function and thus takes over the IP management of the connected network.

Configurable access control
The LANCOM GS-3252P ensures that no unauthorized clients gain access to the network. This is made possible by secure access control on all ports according to IEEE 802.1X (port-based, single-, multi-, and MAC-based).

Secure remote management
Thanks to secure communication protocols such as SSH, SSL, and SNMPv3, the LANCOM GS-3252P enables professional remote management of the network. In addition, the switch supports the TACACS+ protocol for authentication, authorization, and accounting. An optimal solution that promises maximum security, especially for the management and monitoring of multi-site networks.

IPv6 and IPv4 support
Thanks to its dual-stack implementation, the LANCOM GS-3252P can be used in IPv4-only, IPv6-only, or mixed networks. Numerous applications such as SSL, SSH, Telnet, or TFTP can also be run over IPv6 networks. IPv6 features such as stateless autoconfiguration, neighbor device discovery, and MLD snooping comprise the IPv6 features.
The world’s first 1G and 10G virtual chassis platform with 10G stacking designed for mid-enterprise edge and SMB core deployments. The M4300 series scales from 24x1G to 48x10G to deliver resilient, spine and leaf, edge to core connectivity for unified wired and wireless networks.

The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.

Best-in-class stacking

- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption

Higher flexibility

- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds

Lower complexity

- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation

Investment protection

- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection

Secure services

- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies

Industry standard management

- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support

Industry leading warranty

- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
The Aruba 2930F Switch Series is designed for customer creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These basic Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and are ideal for enterprise edge, SMB and branch offices.

A powerful Aruba ProVision ASIC delivers performance and value supporting the latest SDN applications with future proof programmability. It supports 10GbE uplinks, PoE+, robust QoS, and RIP routing.

Features

High-Performance Access Layer Switches
- The Aruba 2930F Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.
- Delivers a consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment.
- Convenient built-in 1GbE or 10GbE uplinks and PoE+ models deliver right-size network access performance.
- Robust basic Layer 3 feature set includes static and RIP routing, ACLs, sFlow, IPv6 with no software licensing required.
- Designed with a powerful ProVision ASIC and support for OpenFlow, the Aruba 2930F is ready to take advantage of SDN applications such as HPE Network Visualizer, Optimizer, and Protector Software products.

Performance and Power at the Edge
- The Aruba 2930F Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with SDN optimizations, low latency, increased packet buffering, and adaptive power consumption.
- Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements.
- Supports up to 370 W of internal PoE+ power for wireless access points, cameras and phones.

Security and Quality of Service You Can Rely on
- The Aruba 2930F Switch Series includes security and quality of services features to build a network that meets ever-changing corporate policies and compliances while protecting your data from both inside and outside attacks.
- Flexible authentication options include standards based security protocols such as 802.1X, MAC and Web Authentication, to enhance security and policy-driven application authentication.
- Powerful, multilevel-access security controls include source-port filtering, RADIUS/TACACS+, SSL, Port Security, and MAC address lockout.

Simplify with Integrated Wired/Wireless Management
- The Aruba 2930F Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
- Supports Aruba Airwave Network Management software to provide common platform for Zero Touch Provisioning management, and monitoring for wired and wireless network devices.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
- Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.
Extend Intent-Based Networking Everywhere

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.
Extend Intent-Based Networking Everywhere

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.
Extend Intent-Based Networking Everywhere

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.
Short Description
Managed layer 3 lite access switch, 48 Ethernet ports, 36 with PoE+ (max. 370 W) and 4 SFP+ ports (10G), 176 Gbps throughput, IPv6/IPv4, 4,000 active VLANs, QoS, 802.1X, TACACS+, country spec. IEC power cords available
Stackable Managed Switch, L3, 48-port 1000BASE-T (RJ45), 2-port 10GBASE-T (RJ45), 2-port 10GBASE-X (SFP+), 176Gbps, USB, Mini-USB / RJ45 / RS232 console ports, APS150W PSU
Aruba 2930F 48G PoE+ 4SFP+ Switch
Catalyst 9200L 48-port Data 4x1G uplink Switch, Network Essentials
Catalyst 9200L 24-port PoE+ 4x10G uplink Switch, Network Essentials
Catalyst 9200L48-port PoE+ 4x1G uplink Switch, Network Essentials
Manufacturer
Lancom Systems
Netgear
HPE
Cisco
Cisco
Cisco