HPE Aruba Networking J9151E network transceiver module Fiber optic 10000 Mbit/s SFP+

GLC-LX-SM-RGD=

MA-SFP-10GB-SR

SFP-10G-LR-S=

720187-B21

SFP-10G-ER-AO

The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network (Figure 1). SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. 1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers The 100BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.

SFP Transceivers are compliant with the Multi-Source Agreement (MSA) ensuring compatibility with a wide range of networking equipment. Select your choice or Copper or Fiber versions that support Fast Ethernet, Gigabit and 10G Ethernet speeds.

The Cisco 10GBASE-LR-S SFP Module delivers a wide variety of 10-Gigabit Ethernet connectivity options for data centre, enterprise and service provider applications over single-mode fibre. This hot-swappable input/output transceiver plugs into an Ethernet SFP+ port of a Cisco switch and offers optical interoperability with 10GBASE XENPAK, 10GBASE X2 and 10GBASE XFP interfaces on the same link.

Do you need high-performance QSFP+ transceivers for your BladeSystem? The HP BladeSystem c-Class QSFP+ Transceivers deliver a full-duplex optical module with four independent transmit and receive channels supporting data rates up to 4x10 Gb/s for high-density applications and improving performance.

Supports 4 lanes x 10.3 Gb/s.

Supports link distances up to 100m on OM3 MMF and 150m on OM4 MMF for SR4 and up to 10 km on SMF for LR4.

Less than 1.5 W maximum power dissipation for SR4/CSR4 and less than 3.5 W for LR4.

Can be used either for 40GbE or for aggregating 4x 10GbE links.

MPO connector (SR4) or LC connector (LR4).

AddOn's SFP-10G-ER-AO is a Force10 compatible SFP+ transceiver that operates at 1550nm over Single-Mode Fiber, with a maximum reach of 40km connected via a LC connector built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.

AddOn transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant for all networking product lines, and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.

AddOn Computer has developed a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time. AddOn products are guaranteed by the MAGNUSON-MOSS WARRANTY ACT to not affect or void OEM warranties.

1000BASE-LX/LH Long Wavelength; Rugged

SFP+ 10GBASE-SR transceiver module

10GBASE-LR S-Class SFP Module for 10-Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (SFP-10G-LR-S=)

40GB, QSFP+, MPO, SR4, 850nm, 100m

10GBase-ER SFP+ Transceiver SMF, 1550nm, 40km, LC

Cisco

Cisco

Cisco

HPE

AddOn Networks