We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
HPE
HPE Aruba Networking 2930F 24G PoE+ 4SFP+ Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U
SKU
JL255A
In Stock
Aruba 2930F 24G PoE+ 4SFP+ Switch
Secure fast payment on this purchase
Next Day (UK) Delivery offered on stock items
Management features | |
---|---|
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
Multicast support | Yes |
Switch layer | L3 |
Ports & interfaces | |
SFP+ module slots quantity | 4 |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Installed SFP modules quantity | 0 |
Installed SFP+ modules quantity | 0 |
Console port | RJ-45/micro-USB |
Network | |
Auto-sensing | Yes |
Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Link aggregation | Yes |
Auto MDI/MDI-X | Yes |
10G support | Yes |
Half duplex | Yes |
Virtual LAN features | Private VLAN |
Data transmission | |
Throughput | 95.2 Mpps |
Latency (1 Gbps) | 3.8 µs |
Latency (10 Gbps) | 1.6 µs |
Packet buffer memory | 12.38 MB |
MAC address table | 32768 entries |
Switching capacity | 128 Gbit/s |
Security | |
Authentication | MAC-based authentication, Web-based authentication |
SSH/SSL support | Yes |
Access Control List (ACL) | Yes |
Authentication type | RADIUS, TACACS+ |
Multicast features | |
Multicast support | Yes |
Protocols | |
Management protocols | SNMPv1, SNMPv2, SNMPv3 |
Routing protocols | RIPng, VRRP |
IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
Design | |
Form factor | 1U |
Stackable | Yes |
Rack mounting | Yes |
Airflow direction | Side-to-side airflow |
Performance | |
---|---|
Virtual stacking (units) | 8 |
Processor frequency | 1016 MHz |
Memory type | DDR3-SDRAM |
Internal memory | 1024 MB |
Flash memory | 4096 MB |
Built-in processor | Yes |
Processor model | ARM Cortex-A9 |
Packet buffer memory | 12.38 MB |
Stackable | Yes |
Power | |
Power consumption (max) | 445 W |
Power supply included | Yes |
AC input voltage | 100 - 240 V |
AC input frequency | 50/60 Hz |
Power source | AC |
Power over Ethernet (PoE) | |
Total Power over Ethernet (PoE) budget | 370 W |
Power over Ethernet (PoE) | Yes |
Operational conditions | |
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 15 - 95% |
Operating temperature (T-T) | 0 - 45 °C |
Operating relative humidity (H-H) | 15 - 95% |
Heat dissipation | 258 BTU/h |
Virtual LAN features | |
VLAN support | Yes |
Virtual LAN features | Private VLAN |
Weight & dimensions | |
Width | 442.5 mm |
Depth | 304.2 mm |
Height | 43.9 mm |
Weight | 3.9 kg |
IPv4 & IPv6 features | |
IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
Technical details | |
Virtual stacking (units) | 8 |
Form factor | 1U |
Stackable | Yes |
Processor frequency | 1016 MHz |
Rack mounting | Yes |
Built-in processor | Yes |
Memory | |
Packet buffer memory | 12.38 MB |
Memory type | DDR3-SDRAM |
Internal memory | 1024 MB |
Flash memory | 4096 MB |
You may also be interested in
Product |
![]() Recommended
HPE Aruba Networking 2930F 24G PoE+ 4S...
Login for pricing
|
![]() Popular
NETGEAR M4300-52G Managed L3 Gigabit E...
Login for pricing
|
![]() |
![]() New
Cisco Catalyst 9200L Managed L3 Gigabi...
Login for pricing
|
![]() Bestseller
Cisco Catalyst 9200L Managed L3 Gigabi...
Login for pricing
|
![]() Hot Product
Cisco Catalyst C9200 Managed L3 Gigabi...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
JL255A
|
GSM4352S-100NES
|
MS120-48LP-HW
|
C9200L-24T-4X-E
|
C9200L-48T-4G-E
|
C9200-24P-E
|
Description |
The Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. Virtual Switching Framework (VSF) provides stacking scale and simplicity for enterprise edge, SMB and branch offices. The 2930F delivers performance and value with support for RIP routing, Access OSPF, 10GbE uplinks, up to 740W PoE+, robust QoS, and requires no software licensing.
Features High-Performance Access Layer Switches - The Aruba 2930F Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks. - Optimized for the digital workplace with unified management tools such as Aruba ClearPass Policy Manager, Aruba Airwave and Aruba Central. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment. - Stacking with Virtual Switching Framework (VSF) and convenient built-in 1GbE or 10GbE uplinks and PoE+ models deliver right-size network access performance. - Robust Layer 3 feature set includes Access OSPF, static and RIP routing, ACLs, sFlow, IPv6 with no software licensing required. Performance and Power at the Edge - The Aruba 2930F Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with SDN optimizations, low latency, increased packet buffering, and adaptive power consumption. - Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements. - Virtual Switching Framework (VSF) virtualizes up to eight physical switches into one logical device for simpler, flatter, more agile networks. - Supports up to 740W of internal PoE+ power for wireless access points, cameras and phones. Security and Quality of Service You Can Rely on - The Aruba 2930F Switch Series includes security and quality of services features to build a network that meets ever-changing corporate policies and compliances while protecting your data from both inside and outside attacks. - Flexible authentication options include standards based security protocols such as 802.1X, MAC and Web Authentication, to enhance security and policy-driven application authentication. - Powerful, multilevel-access security controls include source-port filtering, RADIUS/TACACS+, SSL, Port Security, and MAC address lockout. Simplify with Integrated Wired/Wireless Management - The Aruba 2930F Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies. - Supports Aruba Airwave Network Management software to provide common platform for Zero Touch Provisioning management, and monitoring for wired and wireless network devices. - Cloud-based management supported by Aruba Central. - RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events. - Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic. |
The world’s first 1G and 10G virtual chassis platform with 10G stacking designed for mid-enterprise edge and SMB core deployments. The M4300 series scales from 24x1G to 48x10G to deliver resilient, spine and leaf, edge to core connectivity for unified wired and wireless networks.
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network. Best-in-class stacking - M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables) - High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption Higher flexibility - Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization - 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds Lower complexity - Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license - DHCP/BootP innovative auto-installation including firmware and configuration file upload automation Investment protection - Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks - Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection Secure services - With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs - With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies Industry standard management - Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN - Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support Industry leading warranty - NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty - 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement |
Cisco Meraki MS120 switches provide Layer 2 access switching ideal for branch and campus deployments. The MS120 series features a variety of power options designed to meet the diverse needs of large enterprise networks.
Cisco Meraki switches are built from the ground up for cloud management without compromising any of the power and flexibility traditionally found in enterprise-class switches. All Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, simply plug it in. Meraki switches do not require CLI for switch configuration or port management. Meraki’s centralized management platform gives administrators granular visibility into their network. Our dashboard helps you keep track of every configuration change in your network with our detailed event and change logs. Hardware platform - Reliable platform with 24/7 Meraki Support - Clean lines and beautiful design - Low noise, fanless model available - Voice and video QoS - Non-blocking switch fabric Cloud management - Email alerts for switch management - Remote troubleshooting tools - Manage ports from a GUI-based dashboard - Zero-touch provisioning - Per-port and per-client usage statistics - Secure, user-scheduled firmware updates Switching capabilities - Layer 2 - DHCP Relay - 802.1X Authentication - DHCP Snooping - STP Enhancements - IPv4 and IPv6 ACLs |
Extend Intent-Based Networking Everywhere
Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. |
Extend Intent-Based Networking Everywhere
Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. |
Extend Intent-Based Networking Everywhere
Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. |
Short Description |
Aruba 2930F 24G PoE+ 4SFP+ Switch
|
Stackable Managed Switch, L3, 48-port 1000BASE-T (RJ45), 2-port 10GBASE-T (RJ45), 2-port 10GBASE-X (SFP+), 176Gbps, USB, Mini-USB / RJ45 / RS232 console ports, APS150W PSU
|
48 × Gigabit eternet ports, 4 × Gigabit SFP, Layer 2, Fanless, 370W
|
Catalyst 9200L 24-port Data 4x10G uplink Switch, Network Essentials
|
Catalyst 9200L 48-port Data 4x1G uplink Switch, Network Essentials
|
Catalyst 9200 24-port PoE+ Switch, Network Ess
|
Manufacturer |
HPE
|
Netgear
|
Cisco
|
Cisco
|
Cisco
|
Cisco
|