We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
HPE
HPE Aruba Networking 2930F 24G 4SFP+ Managed L3 Gigabit Ethernet (10/100/1000) 1U
SKU
JL253A
In Stock
Aruba 2930F 24G 4SFP+ Switch
Secure fast payment on this purchase
Next Day (UK) Delivery offered on stock items
Management features | |
---|---|
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
Multicast support | Yes |
Switch layer | L3 |
Ports & interfaces | |
SFP+ module slots quantity | 4 |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Installed SFP modules quantity | 0 |
Installed SFP+ modules quantity | 0 |
Console port | RJ-45/micro-USB |
Network | |
Auto-sensing | Yes |
Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Link aggregation | Yes |
Auto MDI/MDI-X | Yes |
10G support | Yes |
Half duplex | Yes |
Virtual LAN features | Private VLAN |
Data transmission | |
Throughput | 95.2 Mpps |
Latency (1 Gbps) | 3.8 µs |
Latency (10 Gbps) | 1.6 µs |
Packet buffer memory | 12.38 MB |
MAC address table | 32768 entries |
Switching capacity | 128 Gbit/s |
Security | |
Authentication | MAC-based authentication, Web-based authentication |
SSH/SSL support | Yes |
Access Control List (ACL) | Yes |
Authentication type | RADIUS, TACACS+ |
Multicast features | |
Multicast support | Yes |
Protocols | |
Management protocols | SNMPv1, SNMPv2, SNMPv3, Telnet, RMON1, FTP |
Routing protocols | RIPng, VRRP |
IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
Design | |
Form factor | 1U |
Stackable | Yes |
Rack mounting | Yes |
Airflow direction | Side-to-side airflow |
Performance | |
---|---|
Virtual stacking (units) | 8 |
Processor frequency | 1016 MHz |
Memory type | DDR3-SDRAM |
Internal memory | 1024 MB |
Flash memory | 4096 MB |
Built-in processor | Yes |
Processor model | ARM Cortex-A9 |
Packet buffer memory | 12.38 MB |
Stackable | Yes |
Power | |
Power consumption (max) | 29.3 W |
Power supply included | Yes |
AC input voltage | 100 - 240 V |
AC input frequency | 50/60 Hz |
Power source | AC |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 15 - 95% |
Operating temperature (T-T) | 0 - 45 °C |
Operating relative humidity (H-H) | 15 - 95% |
Heat dissipation | 100 BTU/h |
Virtual LAN features | |
VLAN support | Yes |
Virtual LAN features | Private VLAN |
Weight & dimensions | |
Width | 442.5 mm |
Depth | 200.2 mm |
Height | 43.9 mm |
Weight | 2.41 kg |
IPv4 & IPv6 features | |
IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
Technical details | |
Virtual stacking (units) | 8 |
Form factor | 1U |
Stackable | Yes |
Processor frequency | 1016 MHz |
Rack mounting | Yes |
Built-in processor | Yes |
Memory | |
Packet buffer memory | 12.38 MB |
Memory type | DDR3-SDRAM |
Internal memory | 1024 MB |
Flash memory | 4096 MB |
You may also be interested in
Product |
![]() |
![]() Recommended
Cisco Catalyst 9200L Managed L3 Gigabi...
Login for pricing
|
![]() Hot Product
Cisco Catalyst 9200L Managed L3 Gigabi...
Login for pricing
|
![]() Bestseller
Ubiquiti UniFi Pro 48-Port PoE Managed...
Login for pricing
|
![]() New
Cisco Catalyst 1000-48P-4G-L Network S...
Login for pricing
|
![]() Popular
NETGEAR M4250-10G2XF-PoE+ Managed L2/L...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
JL253A
|
C9200L-48T-4G-E
|
C9200L-24P-4G-E
|
USW-PRO-48-POE
|
C1000-48P-4G-L
|
GSM4212PX-100EUS
|
Description |
The Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. Virtual Switching Framework (VSF) provides stacking scale and simplicity for enterprise edge, SMB and branch offices. The 2930F delivers performance and value with support for RIP routing, Access OSPF, 10GbE uplinks, up to 740W PoE+, robust QoS, and requires no software licensing.
Features High-Performance Access Layer Switches - The Aruba 2930F Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks. - Optimized for the digital workplace with unified management tools such as Aruba ClearPass Policy Manager, Aruba Airwave and Aruba Central. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment. - Stacking with Virtual Switching Framework (VSF) and convenient built-in 1GbE or 10GbE uplinks and PoE+ models deliver right-size network access performance. - Robust Layer 3 feature set includes Access OSPF, static and RIP routing, ACLs, sFlow, IPv6 with no software licensing required. Performance and Power at the Edge - The Aruba 2930F Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with SDN optimizations, low latency, increased packet buffering, and adaptive power consumption. - Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements. - Virtual Switching Framework (VSF) virtualizes up to eight physical switches into one logical device for simpler, flatter, more agile networks. - Supports up to 740W of internal PoE+ power for wireless access points, cameras and phones. Security and Quality of Service You Can Rely on - The Aruba 2930F Switch Series includes security and quality of services features to build a network that meets ever-changing corporate policies and compliances while protecting your data from both inside and outside attacks. - Flexible authentication options include standards based security protocols such as 802.1X, MAC and Web Authentication, to enhance security and policy-driven application authentication. - Powerful, multilevel-access security controls include source-port filtering, RADIUS/TACACS+, SSL, Port Security, and MAC address lockout. Simplify with Integrated Wired/Wireless Management - The Aruba 2930F Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies. - Supports Aruba Airwave Network Management software to provide common platform for Zero Touch Provisioning management, and monitoring for wired and wireless network devices. - Cloud-based management supported by Aruba Central. - RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events. - Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic. |
Extend Intent-Based Networking Everywhere
Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. |
Extend Intent-Based Networking Everywhere
Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. |
Second-Generation UniFi Switching
We’ve redesigned our UniFi Switches from the ground up. Near Silent Cooling Our new airflow design reduces the need for fan usage. Powerful Hardware and Software UniFi Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities. Redundant Power System UniFi SmartPower RPS, USP-RPS, is our PSU failover system. Power Supply Failure In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. UniFi SmartPower One UniFi SmartPower device can support up to 6 devices until the failed device is replaced. Touchscreen Display The 1.3" touchscreen display allows easy monitoring and quick troubleshooting. |
The Cisco Catalyst 1000-48P-4G-L Network Switch is an enterprise-class fixed managed Gigabit Ethernet Layer 2 switch designed for small businesses and branch offices. This simple, flexible and secure network switch is ideal for critical IoT (Internet of Things) deployments. It operates on Cisco IOS Software and features a CLI (command-line interface) as well as an intuitive web user interface.
|
Switching engineered for 1G AV over IP with PoE+, Ultra90 PoE++ and rear-facing ports ensuring a clean integration in AV racks. M4250 switches come pre-configured for standard audio and video signals. When requirements are more specific, an AV user interface offers customization with port-based profiles. For audio Dante, Q-SYS and AES67 profiles are available, as well as an AVB profile requiring an AVB license sold separately. For video the M4250 offers profiles for NVX, SVSI, Q-SYS, NDI, Dante etc. as well as audio/video/control mixed profiles. When multiple switches, NETGEAR IGMP Plus brings automation for you to just connect them together.
M4250 Support for Audio Video Bridging (AVB) One of the many features designed into the new M4250 product line is full support for Audio Video Bridging (AVB), an industry standard for transporting content over a network. AVB is used most often when very low latency is required such as in live performances when lip sync is critical. All of the AV Line M4250 switches can be optionally licensed for AVB support. |
Short Description |
Aruba 2930F 24G 4SFP+ Switch
|
Catalyst 9200L 48-port Data 4x1G uplink Switch, Network Essentials
|
Catalyst 9200L 24-port PoE+ 4x1G uplink Switch, Network Essentials
|
USW-Pro-48-POE Gen 2, AC/DC, Internal, 660W, (48) 10/100/1000 RJ45 Ports, (4) 1/10 Gbps SFP+, 442.4 x 399.6 x 43.7 mm
|
Catalyst 1000-48P-4G-L Network Switch, 48 Gigabit Ethernet (GbE) PoE+ Ports, 370W PoE Budget, four 1 G SFP Uplink Ports, Enhanced Limited Lifetime Warranty (C1000-48P-4G-L)
|
60 Gbps, 8x 1G PoE+ RJ-45, 2x 1G RJ-45, 2x SFP+, 440x200x43.2 mm
|
Manufacturer |
HPE
|
Cisco
|
Cisco
|
Ubiquiti
|
Cisco
|
Netgear
|