Ergonomic Solutions SpacePole Digital Signage Menu board mount, with tilt, for 4 screens (portrait) up to 43" (VESA 100 and 200)

LVS1U

STNDMTV70

VFM-F10/WH

PLASMA-M1950E

FL55-875BL1

Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements

The LVS1U ConnexSys Video Wall system landscape mount ships with rails for each mount.

SPEED
- Hang units on a single strut channel for quick row leveling
- No need for horizontal spacers
- Vertical measurement is simply the height of the display to the next rail
- Compatible with most 1-5/8" sizes of channel strut
- Reduces installation time - especially for XL and recessed configurations
- Tool-free ClickConnect™ latching secures displays
- PowerZone™ provides 6 points of adjustment in one easy-to-access location at the top of the mount

MISCELLANEOUS
- Security - pad lock 1/4" shank diameter
- Safety tested
- Universal interface
- Each mount comes out of the box with adjustments set in the exact same position

RIGIDITY
- Rigid frame keeps displays where you set them, even after extending for service
- Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes

Mobile Display Mount | Multimedia Device Shelf | For 32" to 75" Displays

This portable TV cart makes it easy to create a mobile media center, providing a convenient and cost-effective way to share A/V equipment between rooms. Engineered with a sleek and sturdy design, the TV cart provides a secure mount for a 32" to 75" TV (with maximum weight of 88 lb./40 kg) and a removable multi-media shelf for placing your computer, media player or keyboard. It also includes a camera shelf for web-conferencing.

Move Your Media Center from Room to Room

The mobile TV cart saves you the cost of buying multiple flat-panel TVs. Simply roll the TV cart between boardrooms, classrooms and meeting rooms, to share your media equipment. The cart features a small footprint that enables you to stand close to the display, while delivering a presentation. You can also set up a display in your lobby during special events or set up a permanent display in areas where you can’t wall mount. The wheels are lockable for stationary use.

Adjust Your Display with Ease

With the TV cart’s spring-assisted height adjustment, you can raise or lower the display mount with one smooth motion, from a minimum height of 3.6 ft. (1110 mm) to a maximum height of 4.9 ft. (1510 mm) - a lift of up to 15.7 in. (40 cm). The TV mount rotates up to 90 degrees, so you can change the position of your display from landscape to portrait. You can also tilt your TV +5 to -12 degrees, to find the optimal viewing angle.

Durable Construction

The TV cart’s durable construction makes it ideal for commercial use, in environments with multiple users and frequent movement between meeting areas. Built-in cable management keeps your cables organized and hidden from view.

The STNDMTV70 is backed by a StarTech.com 5-year warranty and free lifetime technical support.

The StarTech.com Advantage

- Easily share displays between rooms, by mounting a 32" to 75" flat-screen TV to this mobile TV cart
- Smooth spring-assisted height adjustment up to 15.7" (400 mm)
- Multimedia device shelf for web conferencing and other applications; Wheels for easy mobility, also lockable for safety

Vision’s VFM-F10 floorstand has an aesthetic which leans into the user and has a sense of stability. Big wheels make it easy to move, and the geometry is designed to minimize trip hazards so the user can interact with the display as naturally as possible, while still meeting tough UL1678 tip standards.

The fine structure perfectly compliments thin touch displays. Enhance a meeting space with this attractive floorstand. Stop using paper flipcharts – start using digital flipcharts.

UL1678 Approved

To get this certification the heaviest display allowable is installed, the wheels are locked, then the floor is tipped 10° in every direction; the stand mustn’t tip over. This limits to SWL of this floorstand to 45 kg (99 lb).

VESA 400x400

This stand can take all VESA sizes up to 400 x 400 mm, including less common sizes such as 350 x 350 mm.

Rotation

Users can rotate freely from portrait to landscape. It uses a premium slewing ring bearing. Note: Only transport in portrait mode. Only rotate to landscape on flat ground with wheels locked. Rotation can be disabled.

Optimized for 50-55″

The shape and size is optimized for displays from 50 – 55″, including for example the Samsung Flip. Smaller displays can be fixed but the legs will be visible in portrait mode.

7° Angle

The display sits at a 7° angle. This reduces glare and reflection from ceiling lights, and presents a similar drawing angle to old-school flipcharts.

4" Wheels

Medical-grade 4″ (100 mm) castors glide over any bumps, making the stand easy to pull even on deep carpet. Big wheels reduce vibration of your expensive AV equipment. All wheels are lockable.

Cable Management

Hide cables in the lower section of the rear legs.

Cable Hooks

Two generous hooks around the back allow cables to be stashed out of sight. Particularly useful to hang power extension cables on when you need to move it.

Flip-up shelf

The rear shelf is 460 mm (18.1″) wide – big enough for a laptop and mouse. If it’s not needed just fold it up out of the way.

Media Player Fixing Points

100 x 100 mm Holes on the VESA mount accommodate a thin Media Player.

Side By Side

Some displays can be linked together to form one big display, so the F10 is designed with this in mind. The legs are not wider than the display in portrait mode so multiple displays can be parked next to each other.

Get Through Doorways

At only 652 mm (25.7″) deep this stand fits through standard doorways no problem.

The Neomounts PLASMA-M1950E is a mobile floor stand for screens up to 100" and a weight capacity of 100 kg. This trolley allows you to use a large display over multiple rooms. Enjoy the optimal viewing positioning for both standing and seated audiences, wherever you like.

The versatile tilt (15°) technology allows the trolley to change to any desired viewing angle to fully benefit from the capabilities of the screen. The mount is manually adjustable in height from 134 to 166 cm, while the practical cable management conceals and routes cables from screen to floor.

The PLASMA-M1950E features four solid castor wheels with brake to easily move it to another location. Installation is easy and can be done quickly.

The Neomounts FL55-875BL1 MOVE Lift is a mobile floor stand for displays up to 100" with a maximum weight capacity of 110 kg. The trolley has 65 cm motorized height adjustment (35 mm/second), is operated with a wired remote control and features an anti-collision system for extra safety. A lockable, ventilated hardware compartment with cable opening is included and optional for installation.

The MOVE Lift trolley features practical handles and four solid 10 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL55-875BL1. The open design wheelbase allows easy access to the (touch) display and enables easier movement around objects. The included cable duct, optional to install, conceal and route cables from floor stand to screen. A practical cable management bracket at the back of the trolley ensure easy and safe relocation. Additionally, at the bottom of the trolley a space with tie wrap holes is available to install a power strip.

The floor stand is packed partially pre-assembled, to ensure fast and easy installation. The display can be secured by locking the brackets using a padlock (not included). Additionally, the FL55-875BL1 is compactly packed for optimized transportation and storage.

The universal AFL-875BL1 and AV1-875BL videobar & multimedia kits are optionally available and enable the installation of a separate cam shelf and multimedia device shelf to the trolley. Included to the kits are an adapter for respectively the Logitech Rally Bar (Mini) or Bose Professional VB-S/VB1. Various other accessories are also available for the MOVE Lift series, such as the ADM-875BL2 dual screen adapter or the practical ABL-875 wheel brake lock set.

ConnexSys Video Wall Landscape Mounting System with Rails

StarTech.com Heavy Duty Rolling Portable TV Cart Stand with Wheels - 32 to 75 inch - Adjustable Rotating Mobile Flat Panel Screen Mount (STNDMTV70)

White Flipchart-Style Floorstand

Neomounts PLASMA-M1950E TV trolley - 60-100" - max 100 kg - manual h 134-166 cm - VESA 200x200-1000x600 - incl. cam/hardware shelf - black

Neomounts MOVE Lift FL55-875BL1 TV trolley - 55-100" - max 110 kg - motorised h 111,3-176,3 cm (35mm/sec) - VESA 100x100-800x600 - lockable (excl. lock) - TÜV certified - video bar kit optionally available - black

Chief

StarTech.com

Vision

Neomounts

Neomounts