We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Draytek
DrayTek VigorSwitch PQ2200xb Managed L2+ 2.5G Ethernet (100/1000/2500) Power over Ethernet (PoE) 1U Black
SKU
VSPQ2200XB-K
In Stock
16 x RJ-45 Gigabit Ethernet, 4 x SFP+ 10GbE, Console Port, PoE, 1U, 4.3 kg, 100-240VAC, 550W
Secure fast payment on this purchase
Next Day (UK) Delivery offered on stock items
Management features | |
---|---|
Reset button | Yes |
Switch type | Managed |
System event log | Yes |
Quality of Service (QoS) support | Yes |
Multicast support | Yes |
Switch layer | L2+ |
Ports & interfaces | |
Basic switching RJ-45 Ethernet ports quantity | 16 |
Basic switching RJ-45 Ethernet ports type | 2.5G Ethernet (100/1000/2500) |
Installed SFP modules quantity | 0 |
Installed SFP+ modules quantity | 4 |
Console port | RJ-45 |
2.5G Ethernet (copper) ports quantity | 16 |
Network | |
Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x |
VLAN support | Yes |
Spanning tree protocol | Yes |
Routing entries | 6000 |
Port mirroring | Yes |
Number of VLANs | 256 |
Link aggregation | Yes |
Broadcast storm control | Yes |
10G support | Yes |
Virtual LAN features | MAC address-based VLAN, Management VLAN, Multicast VLAN, Port-based VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN |
IGMP snooping | Yes |
GARP VLAN Registration Protocol (GVRP) | Yes |
Data transmission | |
Jumbo frames | 12000 |
Packet buffer memory | 12 MB |
MAC address table | 16000 entries |
Switching capacity | 160 Gbit/s |
Jumbo frames support | Yes |
Static route | Yes |
Forwarding rate | 119.04 Mpps |
Number of multicast groups filtered | 256 |
Number of VLANs | 256 |
Multicast Listener Discovery (MLD) snooping | Yes |
Security | |
Loop protection | Yes |
Authentication | Guest VLAN, MAC-based authentication, Port-based authentication, Web-based authentication |
Static port security | Yes |
IGMP snooping | Yes |
Access Control List (ACL) | Yes |
Authentication type | AAA, RADIUS, TACACS+ |
DHCP features | DHCP client, DHCP relay, DHCP server, DHCP snooping |
Multicast features | |
Number of multicast groups filtered | 256 |
Multicast support | Yes |
Multicast Listener Discovery (MLD) snooping | Yes |
Protocols | |
GARP VLAN Registration Protocol (GVRP) | Yes |
Design | |
Reset button | Yes |
Form factor | 1U |
Product colour | Black |
LED indicators | Yes |
Rack mounting | Yes |
Performance | |
Firmware upgradeable | Yes |
Packet buffer memory | 12 MB |
Power | |
Power consumption (max) | 550 W |
Power supply included | Yes |
AC input voltage | 100 - 240 V |
Power source | AC/PoE |
Power over Ethernet (PoE) | |
---|---|
Power over Ethernet (PoE) power per port | 90 W |
Power over Ethernet plus (PoE+) ports quantity | 12 |
Total Power over Ethernet (PoE) budget | 400 W |
Power over Ethernet (PoE) ports quantity | 16 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet 4PPoE (PoE++) ports quantity | 4 |
Operational conditions | |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 10 - 90% |
Virtual LAN features | |
VLAN support | Yes |
Number of VLANs | 256 |
Virtual LAN features | MAC address-based VLAN, Management VLAN, Multicast VLAN, Port-based VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN |
Weight & dimensions | |
Width | 440 mm |
Depth | 281 mm |
Height | 44 mm |
Weight | 4.3 kg |
Packaging content | |
Quick start guide | Yes |
Cables included | AC |
Technical details | |
Form factor | 1U |
Product colour | Black |
Firmware upgradeable | Yes |
Rack mounting | Yes |
Memory | |
Packet buffer memory | 12 MB |
Indication | |
LED indicators | Yes |
Mobile network | |
GARP VLAN Registration Protocol (GVRP) | Yes |
Packaging data | |
Quick start guide | Yes |
Cables included | AC |
You may also be interested in
Product |
![]() Recommended
DrayTek VigorSwitch PQ2200xb Managed L...
Login for pricing
|
![]() Popular
Cisco Small Business Catalyst 2960X-24...
Login for pricing
|
![]() |
![]() Hot Product
Mikrotik CRS328-24P-4S+RM network swit...
Login for pricing
|
![]() New
Cambium Networks cnMatrix EX2010-P Man...
Login for pricing
|
![]() Bestseller
Cisco Catalyst 9200L Managed L3 Gigabi...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
VSPQ2200XB-K
|
WS-C2960X-24PS-L
|
IGS-5225-16T4S
|
CRS328-24P-4S+RM
|
MX-EX2010PXA-E
|
C9200L-24T-4G-E
|
Description |
Future Proof multi-Gigabit Ethernet interfaces
16 2.5GbE Ethernet ports improve your core network speed while using existing CAT 5E or later cable infrastructure. Ideal for Wi-Fi 6 access point connections such as the VigorAP 1060C. Advanced Layer 2+ Routing Features Expand your network with support for Layer 3 features. Static Routes, VLAN Routing and Multi-subnet DHCP server connect separate networks through the VigorSwitch. High Speed 10 Gigabit SFP+ Uplinks 4 SFP+ ports allow your network to utilise 10Gbps ports to link Switches, Servers and Networked Storage with more bandwidth. This helps you reduce the risk of bottlenecks occurring in your network. 400W PoE++ Power Budget Provides power through Ethernet to the PoE enabled 2.5 Gigabit LAN ports. Up to 90W (PoE++) can be delivered to the each of the first 4 dedicated Ethernet ports. PoE scheduling and monitoring features ensure your PoE devices are powered and working. Great Security Features Protect your network against unauthorised access and network problems with 802.1X port authentication, DHCP Snooping, IP Source Guard and Access Control Lists. Check the features sections for more information. Manage Centrally or Stand-Alone Configure and monitor the switch through the VigorACS cloud management platform, DrayTek's Central Switch Management for Vigor routers, or directly via the device's Web Interface. VigorSwitch PQ2200xb 16 Port 2.5 GbE 4 Ports 10Gbps SFP+ Switch with PoE+/PoE++ VigorSwitch PQ2200xb is a 2.5 Gigabit L2+ Managed switch with 4 PoE++ 2.5GbE ports, 12 PoE+ 2.5GbE ports (total of 400W output) and 4 additional independent SFP+ 10Gbps interfaces. Ideal for usage with devices where there are throughput demands beyond 1Gbps such as PoE Wi-Fi 6 access points, high bandwidth video or network attached storage. Supported layer 3 features such as a DHCP Server and VLAN Routing help with network stability and efficiency. The VigorSwitch PQ2200xb can be managed in a standalone mode or provisioned and monitored through the VigorACS management platform or a DrayTek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router and clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches. |
The Cisco Catalyst 2960X-24PS-L Network Switch is a fixed-configuration, stackable Gigabit Ethernet switch that provides enterprise-class access for campus and branch applications. This Ethernet switch operates on Cisco IOS Software and supports simple device and network management. It offers advanced Layer 2 and Layer 3 features as well as optional PoE+ power. The switches deliver enhanced application visibility, network reliability and network resiliency.
|
PLANET IGS-5225-16T4S, a new industrial Layer 2+ managed Gigabit Switch, features 16 10/100/1000Mbps ports and 4 100/1000X SFP ports, and supports static Layer 3 routing in a 1U case. With a total switch fabric of 40Gbps, the IGS-5225-16T4S can handle large amounts of data in a secure topology linking to an industrial backbone or high capacity servers. The IGS-5225-16T4S is capable of providing non-blocking switch fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts user-friendly “Front Access” design for easy wiring and maintenance of the IGS-5225-16T4S when placed in the cabinet. AC and DC Redundant Power to Ensure Continuous Operation The IGS-5225-16T4S possesses a 100~240V AC power supply and dual 36~60V DC power supply utilized as redundant power supply to ensure its continuous operation. Its redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. Furthermore, with the 36~60V DC power supply implemented, the IGS-5225-16T4S can be applied as a telecom level device and placed in almost any difficult environment. Digital Input and Digital Output for External Alarm To help the network administrators efficiently manage unexpected network situations, the IGS-5225-16T4S provides Digital Input and Digital Output for external alarm device on the front panel. The Digital Input can be used to detect and log the status of the external devices such as door intrusion detector. The Digital Output could be used to send alarm whenever the IGS-5225-16T4S has port link-down or power failure. Effective Alarm Alert for Better Protection The IGS-5225-16T4S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time to find where the problem is. It will help to save time and human resource. IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the IGS-5225-16T4S helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management The IGS-5225-16T4S offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure,flexible management and simpler networking application. Robust Layer 2 Features The Switch can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the IGS-5225-16T4S allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail-over as well. Powerful Security The IGS-5225-16T4S offers a comprehensive layer 2 to layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The IGS-5225-16T4S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Excellent Traffic Control The IGS-5225-16T4S is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Efficient and Secure Management With built-in Web-based management interface, the IGS-5225-16T4S L2+ Managed Switch offers an easy-to-use, platform-independent management and configuration facility which includes Console, Web and SNMP management interfaces. The SNMP can be managed via any management software based on the standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet or console port and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Extension Solution The four mini-GBIC slots built in the IGS-5225-16T4S support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) or up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the industrial data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-16T4S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
|
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market. |
cnMatrix Switch EX2010-P Improve network performance while reducing the time and cost of provisioning and management cnMatrix™ EX2010-P switches simplify network deployment and operation. When deployed with cnPilot™ WLAN access points and the cnMaestro™ management system, network operators have an affordable, feature rich, high quality unified wired/ wireless enterprise grade network with cnMatrix EX2010-P.
|
Extend Intent-Based Networking Everywhere
Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. |
Short Description |
16 x RJ-45 Gigabit Ethernet, 4 x SFP+ 10GbE, Console Port, PoE, 1U, 4.3 kg, 100-240VAC, 550W
|
Catalyst 2960X-24PS-L Network Switch, 24 Gigabit Ethernet Ports, 370W PoE Budget, four 1 G SFP Uplink Ports, Enhanced Limited Lifetime Warranty (WS-C2960X-24PS-L)
|
Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch
|
ARM 32bit, 98DX3236, 800 MHz, 443 x 300 x 44 mm, 512 MB, 16 MB, -20°C to 60°C494 W, 44 W, 2 fans, 1000 mA, 20 A
|
L2/L3, Managed, 8 x PoE Gigabit Ports, 2 x SFP, Fanless
|
Catalyst 9200L 24-port Data 4x1G uplink Switch, Network Essentials
|
Manufacturer |
Draytek
|
Cisco
|
Planet
|
Mikrotik
|
Cambium Networks
|
Cisco
|