Cisco GLC-SX-MMD, Refurbished network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

AGM734-10000S

AXM763-10000S

EX-SFP-10GE-SR

DEM-431XT

AXM761-10000S

- 1000Base-T Gigabit Ethernet copper connectivity
- RJ45 connector
- Fits into the SFP interfaces of GSM7328FS
- Drives Gigabit Ethernet up to 100m distances with CAT5E/CAT6 cables

- 10 Gigabit Ethernet LRM “long reach multimode” fiber connectivity (802.3aq standard)
- LC duplex connector
- Fits into the two built-in 10GE SFP+ interfaces of GSM73xxS / GSM72xxPS
- Fits into the 10GE SFP+ interface of the SFP+ Adapter Module AX743
- Drives 10 Gigabit Ethernet up to 220 m distances with legacy 62.5/125μm OM1 multimode fiber cables
- Drives 10 Gigabit Ethernet up to 260 m distances with 50/125μm laser-optimized OM3 multimode fiber cables

Juniper EX-SFP-10GE-SR. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+

Designed to support distances up to 550 metres, the DEM-431XT is a high performance 850nm Multi-Mode SFP+ transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fibre cables. The DEM-431XT is 802.3ae 10GBASE-SR compliant and supports Full-duplex 802.3x Flow control. The DEM-431XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa.

D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.

Enhanced Small Form-factor Pluggable Format

The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable.

Hot Pluggable

All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network.

10G Ethernet speeds

The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.

- Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces
- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS
- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743

AGM734, 1000Base-T Gigabit, 1x RJ-45

AXM763, 10GBase-LRM SFP+ LC GBIC, GSM73xxS/GSM72xxPS, 62.5/125μm

Juniper EX-SFP-10GE-SR, Fiber optic, 10000 Mbit/s, SFP+, LC, 300 m, 850 nm

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (550m)

PROSAFE 10GBASE-SR SFP+ LC GBIC

Netgear

Netgear

Juniper

D-Link

Netgear